Skip to content
SAM WDOL Directory

Wage Determinations

Review SCA, DBA, and CBA wage determinations with location coverage, revisions, rates, and benefit references.

317 records • Page 3 of 14
DBA
128
SCA
99
CBA
90
Active
317
With Rates
224
With Benefits
99
How To Choose
DBA (Construction)
Use for construction, alteration, or repair labor tied to Davis-Bacon prevailing wage requirements.
SCA (Service Contracts)
Use for service contracts where labor categories map to service occupation codes and fringe benefit rules.
CBA (Union Terms)
Use when the solicitation references collective bargaining agreement terms for covered labor classes.
Published May 18, 2026
Illinois • Macon
FOR 6 MONTHS TO 5 YEARS OF SERVICE B) PAID HOLIDAYS: NEW YEAR'S DAY; MEMORIAL DAY; INDEPENDENCE DAY; LABOR DAY; THANKSGIVING DAY; THE FRIDAY AFTER THANKSGIVING DAY; VETERANS' DAY AND CHRISTMAS DAY
$57.99 + $38.44 fringe
ELECTRICIAN (BUILDING)
$48.00 + $24.16 fringe
TRUCK DRIVER: GROUP 5: DRIVERS WHO REQUIRE SPECIAL PROTECTIVE CLOTHING WHILE EMPLOYED ON HAZARDOUS WASTE WORK
$45.61 + $27.56 fringe
Published May 18, 2026
Illinois • Cumberland
BACKHOE
$45.15 + $26.00 fringe
PAINTER (DRYWALL FINISHING/TAPING ONLY), INCLUDING BRUSH AND TAPER: NEW APARTMENTS AND CONDOMINIUMS THREE STORIES AND OVER
$35.29 + $14.50 fringe
CEMENT MASON/CONCRETE FINISHER
$32.60 + $18.91 fringe
Published May 18, 2026
Illinois • Fulton, Hancock, Henderson +7
LINE CONSTRUCTION: LINEMAN AND SUBSTATION TECHNICIAN (FULTON, HANCOCK, HENDERSON, KNOX, MCDONOUGH, MERCER (N. HENDERSON & SUEZ TWPS), PEORIA, STARK, TAZEWELL, AND WARREN COUNTIES)
$58.58 + $26.29 fringe
LINE CONSTRUCTION: CABLE SPLICER (MERCER COUNTY (EXCEPT NORTH HENDERSON AND SUEZ TWPS)) FOOTNOTE: A. PAID HOLIDAYS: MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, AND THANKSGIVING DAY
$53.12 + $24.53 fringe
RUCTION: LINEMAN, TECHNICIAN, HEAVY EQUIPMENT OPERATOR (MERCER COUNTY (EXCEPT NORTH HENDERSON AND SUEZ TWPS)) FOOTNOTE: A. PAID HOLIDAYS: MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, AND THANKSGIVING DAY
$52.67 + $24.38 fringe
Published May 18, 2026
Illinois • Winnebago
FOR UNDER 5 YEARS OF SERVICE. B. PAID HOLIDAYS: NEW YEAR'S DAY, MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, THANKSGIVING DAY, FRIDAY AFTER THANKSGIVING DAY, VETERANS' DAY AND CHRISTMAS DAY
$65.17 + $38.44 fringe
PER HOUR EXTRA
$56.75 + $51.05 fringe
PER HOUR EXTRA
$56.05 + $51.05 fringe
Published May 18, 2026
Illinois • Edwards
BACKHOE
$45.15 + $26.00 fringe
ELECTRICIAN (ALL OTHER WORK)
$44.99 + $23.48 fringe
SHEET METAL WORKER (INCLUDING HVAC)
$34.27 + $17.44 fringe
Published May 18, 2026
Illinois • Clark, Douglas, Edgar
BACKHOE
$45.15 + $26.00 fringe
PREMIMUM
$35.29 + $14.50 fringe
SHEET METAL WORKER: INCLUDING HVAC (CLARK AND EDGAR COUNTIES)
$33.50 + $20.45 fringe
Published May 18, 2026
Illinois • Bureau, Carroll, Henry +7
EQUIPMENT REQUIRES AN OILER
$63.00 + $51.00 fringe
STOCKTON, WARDS GROVE, PLEASANT VALLEY, AND BERRENMAN TWPS), LEE, OGLE, STEPHENSON, WHITESIDE (GENESEE, JORDAN, HOPKINS, STERLING, HUME, MONTGOMERY, TAMPICO, AND HAHNAMAN TWPS) AND WINNEBAGO COUNTIES)
$62.61 + $43.96 fringe
EQUIPMENT REQUIRES AN OILER
$62.45 + $51.00 fringe
Published May 18, 2026
Illinois • Crawford
BACKHOE
$45.15 + $26.00 fringe
SHEET METAL WORKER (INCLUDING HVAC)
$33.50 + $20.45 fringe
CEMENT MASON/CONCRETE FINISHER
$32.60 + $18.91 fringe
Published May 18, 2026
Illinois • Kankakee
FOR EMPLOYEE WITH LESS THAN 5 YEARS SERVICE
$70.68 + $38.44 fringe
REQUIRES OILER
$64.80 + $51.00 fringe
REQUIRES OILER
$63.50 + $51.00 fringe
Published May 18, 2026
Illinois • Washington
ON COUNTY (ADDIEVILLE, COVINGTON, CARDES, CASPARS, DAMIANSVILLE, DARMSTRAT, ELKHORN, JOHANNISBURG, LIVELY GROVE, NASHVILLE, NEW MENDEN, OAKDALE, OKAWVILLE, PLUM, RENTCHER, STONE CHURCH HILL, & VENEDY))
$47.75 + $23.42 fringe
PLUMBER: EXCLUDING HVAC (WASHINGTON COUNTY (REMAINDER))
$45.00 + $21.54 fringe
ELECTRICIAN: ALL OTHER WORK (WASHINGTON COUNTY (EXCEPT VENEDY TWP))
$44.99 + $23.48 fringe
Published May 18, 2026
Illinois • Moultrie
BACKHOE
$45.15 + $26.00 fringe
PLUMBER (EXCLUDING HVAC)
$37.88 + $25.71 fringe
BRICKLAYER (MOULTRIE AND SHELBY COUNTIES)
$33.49 + $24.93 fringe
Published May 18, 2026
Illinois • Boone, De Kalb, Du Page +5
DUPAGE, KANE, KENDALL, LAKE, MCHENRY, AND WILL COUNTIES)
$63.00 + $51.00 fringe
IRONWORKER: SHEETER (DU PAGE (EASTERN 1/4), LAKE, AND MCHENRY (HEBRON, WOODSTOCK, AND EAST THEREOF) COUNTIES)
$62.71 + $46.58 fringe
ELECTRICIAN (BOONE (ALL) & DEKALB (REMAINDER) COUNTIES)
$62.61 + $43.96 fringe
Published May 18, 2026
Illinois • Fayette
PLUMBER (EXCLUDING HVAC)
$45.00 + $21.54 fringe
ELECTRICIAN: ALL OTHER WORK (FAYETTE COUNTY (REMAINDER OF COUNTY))
$44.99 + $23.48 fringe
BACKHOE
$40.95 + $34.95 fringe
Published May 18, 2026
Illinois • Ford, Grundy, Iroquois +7
EQUIPMENT REQUIRES AN OILER
$63.00 + $51.00 fringe
EQUIPMENT REQUIRES AN OILER
$62.45 + $51.00 fringe
LINE CONSTRUCTION: LINEMAN AND EQUIPMENT OPERATOR (GRUNDY AND KANKAKEE COUNTIES)
$62.10 + $37.29 fringe
Published May 18, 2026
Illinois • Jasper
BACKHOE
$45.15 + $26.00 fringe
SHEET METAL WORKER (INCLUDING HVAC)
$34.27 + $17.44 fringe
BRICKLAYER
$31.56 + $22.28 fringe
Published May 18, 2026
Illinois • Bureau, Carroll, Ford +10
PER AXLE SHALL BE PAID FOR ALL VEHICLES WITH MORE THAN SIX (6) AXLES
$48.93 + $26.70 fringe
PER AXLE SHALL BE PAID FOR ALL VEHICLES WITH MORE THAN SIX (6) AXLES
$48.82 + $26.70 fringe
PER AXLE SHALL BE PAID FOR ALL VEHICLES WITH MORE THAN SIX (6) AXLES
$48.62 + $26.70 fringe
Published May 18, 2026
Illinois • White
ELECTRICIAN (ALL OTHER WORK)
$44.99 + $23.48 fringe
BACKHOE
$40.13 + $32.00 fringe
SHEET METAL WORKER (INCLUDING HVAC)
$34.27 + $17.44 fringe
Published May 18, 2026
Illinois • Coles
BACKHOE
$45.15 + $26.00 fringe
PAINTER (DRYWALL FINISHING), INCLUDING BRUSH AND TAPER: NEW APARTMENTS AND CONDOMINIUMS THREE STORIES AND OVER
$35.29 + $14.50 fringe
SHEET METAL WORKER
$34.27 + $17.44 fringe
Published May 18, 2026
Illinois • Shelby
POWER EQUIPMENT OPERATOR: BACKHOE
$40.71 + $28.75 fringe
PLUMBER (EXCLUDING HVAC)
$37.88 + $25.71 fringe
BRICKLAYER (MOULTRIE AND SHELBY COUNTIES)
$33.49 + $24.93 fringe
Published May 18, 2026
Illinois • Lawrence
BACKHOE
$45.15 + $26.00 fringe
SHEET METAL WORKER (INCLU. HVAC)
$33.50 + $20.45 fringe
CEMENT MASON/CONCRETE FINISHER
$32.60 + $18.91 fringe
Service Contract Act
1969-0099 (Rev 77)
Published May 13, 2026
Illinois, Indiana • Bartholomew, Benton, Blackford +52
23210 · Elevator Repairer
$62.78 + $0.00 fringe

HEALTH & WELFARE: $16.275 per hour for all hours worked. | VACATION: Annual vacation pay is accrued as follows: After 6 months but less than 5 years of service in the industry, 6 percent of regular hourly rate for all hours worked, not to exceed 120 hours pay; more than 5 years of service in the industry, 8 percent of regular hourly rate for all hours worked, at least 160 hours vacation pay. Maximum hours of vacation pay are applicable to an employee who works 1750 hours or more but less than 2000 hours in the year. | HOLIDAYS: A minimum of eight paid holidays per year: New Year's Day, Memorial Day, Independence Day, Labor Day, Veterans' Day, Thanksgiving Day, the Friday after Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174) | PENSION: $10.96 per hour for all hours worked. EDUCATIONAL FUND: $0.80 per hour for all hours worked. 401(k) Annuity: $10.40 per hour all hours worked. Elevator Work Preservation Fund: $1.60 per hour for all hours worked. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of """"wash and wear"""" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs. ** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS ** The duties of employees under job titles listed are those described in the """"Service Contract Act Directory of Occupations"""", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated. ** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) ** Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be retroactive to the commencement date of the contract (See 29 CFR 4.6(b)(2)(iv)(C)(vi)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work. 3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, U.S. Department of Labor, for review (See 29 CFR 4.6(b)(2)(ii)). 4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request. 5) The contracting officer transmits the Wage and Hour decision to the contractor. 6) The contractor informs the affected employees. Information required by the Regulations must be submitted on SF-1444 or bond paper. When preparing a conformance request, the """"Service Contract Act Directory of Occupations"""" (the Directory) should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

Service Contract Act
1996-0223 (Rev 69)
Published May 13, 2026
Alabama, Alaska, American Samoa +51 • Abbeville, Acadia, Accomack +1879
31010 · Airplane Pilot
$35.43 + $0.00 fringe

HEALTH & WELFARE: $5.55 per hour, up to 40 hours per week, or $222.00 per week or $962.00 per month HEALTH & WELFARE EO 13706: $5.09 per hour, up to 40 hours per week, or $203.60 per week, or $882.27 per month* *This rate is to be used only when compensating employees for performance on an SCA- covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706. | VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) | HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174) VACATION (Hawaii): 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) HEALTH & WELFARE (Hawaii): $2.42 per hour, up to 40 hours per week, or $96.80 per week, or $419.47 per month for all employees on whose behalf the contractor provides health care benefits pursuant to the Hawaii prepaid Health Care Act. For those employees who are not receiving health care benefits mandated by the Hawaii prepaid Health Care Act, the new health and welfare benefit rate will be $5.55 per hour, up to 40 hours per week. HEALTH & WELFARE (Hawaii EO 13706): $1.96 per hour, up to 40 hours per week, or $78. 40 per week, or $339.73 per month for all employees on whose behalf the contractor provides health care benefits pursuant to the Hawaii prepaid Health Care Act. For those employees who are not receiving health care benefits mandated by the Hawaii prepaid Health Care Act, the new health and welfare benefit rate will be $5.09 per hour, up to 40 hours per week. * *This rate is to be used only when compensating employees for performance on an SCA- covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of """"wash and wear"""" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs. ** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS ** The duties of employees under job titles listed are those described in the """"Service Contract Act Directory of Occupations"""", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated. ** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) ** Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be retroactive to the commencement date of the contract (See 29 CFR 4.6(b)(2)(iv)(C)(vi)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work. 3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, U.S. Department of Labor, for review (See 29 CFR 4.6(b)(2)(ii)). 4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request. 5) The contracting officer transmits the Wage and Hour decision to the contractor. 6) The contractor informs the affected employees. Information required by the Regulations must be submitted on SF-1444 or bond paper. When preparing a conformance request, the """"Service Contract Act Directory of Occupations"""" (the Directory) should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

Not affiliated with the U.S. Government. Verify final wage determination applicability and full text on SAM.gov.